FC53
Thermal Transfer Overprinting
- Cost saving
- Optimized operation
- Highly reliable
- Environment friendly
- Effective printing
- Optimized ribbon usage
Dimension
Specification
| Items | FC53-Li | FC53-Ri | FC53-Lc | FC53-Rc |
|---|---|---|---|---|
| Structure | All-metal structure | |||
| Printing Method | Thermal transfer printing | |||
| Resolution | 300 dpi (12 dots/mm) | |||
| Printing Speed | 40-600mm/s | |||
| Printing Width | 53 mm (300dpi) | |||
| Print Area | 53*75mm | 53*75mm | 53*100mm | 53*100mm |
| Processor | 32-bit RSIC processor | |||
| Flash Memory | 8MB (minimum) | |||
| Dynamic Memory | 16MB (minimum) | |||
| Real-time Clock Function | STD, battery discharge life is at least 3 years | |||
| Sensor | • Ribbon tension detection; thermal head position detection; cover open detection. • TPH over temperature detection; ribbon break detection |
|||
| Flexible Packaging Inspection | Electromagnetic induction or synchronizer | |||
| Flexible Packaging Materials | • PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA, CPP, PE, • VMPET, VMCPP and other films and composite films |
|||
| Ribbon Capacity | 1” mandrel with a maximum length of 1100 meters | |||
| Ribbon Type | Type: Wax / Resin Resin width: 20 mm (0.79 ") to 55 mm (2.17") |
|||
| Ribbon Saving | Support interlaced, radial, multiple print signals, digital ribbon saving printing, ribbon back and other ribbon saving modes；The minimum ribbon interval between two lines of printing is not more than 0.5mm | |||
| Air Supply | Max. 6 bar/90 psi | |||
| Air Consumption | As low as 4 ml / print at 2.5 bar | |||
| Print Density Level | Level 31 | |||
| USB Interface | STD, 1 port, type B connector, USB device 2.0 | |||
| USB Main Interface | STD, 1USB disk connection port; USB Host 2.0, automatic detection and setting of connections. | |||
| Serial Port | STD 1 port, female D-SUB 9-pin connector Default 9600, 8/N/1, variable baud rate and format | |||
| Ethernet Interface | STD 1 port, RJ-45 connector, IEEE802.3 10/100BASE-T | |||
| Hardware Interface Port | Input: "Print Start" and a configurable input; Outputs: fault, warning and 2 configurable outputs | |||
| Power Supply | Internal switching power supply module, I / P: AC90V-264V, 47/63 Hz; 150 VA | |||
| Software | HPRT Format Designer | |||
| Environmental Conditions | • Operation: 0 to 40 ° C @ humidity 10% to 90% non-condensing • Storage: -40 to 60 ° C @ humidity 10% to 90% non-condensing |
|||
| Machine Dimension | • Printer: height less than 190 mm, width less than 220 mm, depth less than 236 mm • Controller: height less than 170 mm, width less than 263 mm, depth less than 190 mm |
|||
| Machine Weight | Printer: less than 8 kg ；Controller: less than 5 kg | |||
| Warranty | • Printer: 3 years; Controller: 3 years; • Thermal head: 6 months or 50 KM; Platen: 5 years |
|||